Adjusting Nut Slot Guitar Guitar Craft Academy

This has mm crown height and mm crown width which will allow it to be dressed level down to a uniform height of around mm on frets 1 to 24

If your saw has a width of cut of 1mm, use veneer of 1mm thickness Because I wanted quite narrow fret position markers, I used a saw with a width of cut of

fret slot saw Their tang width can vary from 020 to beyond 023 The best thing to do is know what type of fretwire you are using and get measurements

fret slot width shortscale maple fretboard with 21 fret slots and nut slot width 12th fret: 64 mm; width end: 71 mm; rounded: no; thickness: 6,9 mm; single